Maytag Dryer Repair
Noisy Maytag dryers are not normal; this Maytag dryer repair guide can help in troubleshooting and helping a person repair his Maytag dryer on his own. Included in this guide are steps on how to repair a noisy Maytag dryer. Make sure to read each step carefully and your Maytag dryer will be repaired in no time at all. Included in this Maytag dryer repair guide are the two styles of dryers created by Maytag ─ the Herrin and the Newton. Taking the dryer apart will help you determine which style is yours.
The following are the most likely causes of a noisy Maytag dryer.
The Blower Blade
A noisy Maytag dryer is most likely because of its blower blade. A bad blower blade will cause a roar-like sound in the dryer. To check out the blower blade, make sure it is disconnected from any outlet and take off the panel on its front. Newton style dryers’ blower blades can be accessed by removing each of the two small screws at the bottom of its front panel.
Herrin style dryers’ blower blades, on the other hand, cam be accessed by using a flat screwdriver to pry open the top panel, revealing two screws pointing to the front. Remove then and your front panel should lean in a forward manner and you will be able to lift it off. Upon seeing the blower blades, check to see if it is loose. If it is, replace them and try to look for other factors which may be the cause of the noise coming from the dryer.
The Rollers
Another problem listed in this Maytag dryer repair guide as the probable cause of noisy dryers is the rollers. To be able to check your dryer’s rollers, removing the front panel, the belt, and the drum. With the drum off, you should be able to see a pair of rollers at the back (in other models, they have rollers in front). Try spinning them manually and if they do not spin normally, then the rollers would already need replacing.
The Idler Pulley
A common problem with noisy Maytag dryers is the idler pulley, which is the pulley on which the belt clings onto to be able to maintain tension. To be able to check this, again disconnect it from any source of power, and remove either the front panel or the back panel if your dryer has one. Spin the idler pulley the same way you did with the rollers. If they do not spin smoothly, then this means that your idler pulley already needs replacing.
The blower blade, the rollers, and the idler pulley are the top three main reasons why Maytag dryers become occasionally noisy. If a Maytag dryer owner wants to perform initial repair steps on his Maytag dryer, then referring to this Maytag dryer repair guide is one of the best ways to be able to know which part of his dryer is defective enough to make the dryer noisy.